Anti-Formaldehyde Paint

$53.65 Quart | $111.95 Gallon

Anti-Formaldehyde Paint is a protective finish that dries to a hard, durable film. Ideal for interior & exterior walls & ceilings, trim and furniture, including kitchens and bathrooms. This paint is specifically formulated to absorb and neutralize formaldehyde from surfaces and surrounding air, for improved indoor air quality. Available in four sheens.

Select Paint Color

The colors on your screen do not always give an accurate representation. Ordering a sample or free color card is highly recommended.

I've ordered this color before:

Yes

Select Finish

Select Size

Quart

Gallon

Select Quantity

Order an un-tinted (white) sample of this product

Product Overview

Anti-Formaldehyde Paint is a protective finish that dries to a hard, durable film. Designed to absorb and neutralize formaldehyde.

Finish: Available in four sheens - Matte, Eggshell, Semi-Gloss & Gloss
Water-Based: Non-toxic, VOC-free formula provides long-lasting protection without the harsh chemicals or odors found in conventional paints
Interior / Exterior: Interior & Exterior
Recommended For: Walls & ceilings, trim and furniture, including kitchens and bathrooms
You Need to Know: This paint is specifically formulated to absorb and neutralize formaldehyde from surfaces and surrounding air, for improved indoor air quality
Coverage: 500 sq. ft. per gallon | 125 sq. ft. per quart; 3 coats recommended
Application: Apply with a synthetic brush, roller, or airless sprayer. See Application Instructions below for more details

Application Instructions

Product Label
Coverage	500 sq. ft. per gallon
Recommended coats	2
Description	Anti-Formaldehyde Paint is a protective finish that dries to a hard, durable film. Ideal for interior & exterior walls & ceilings, trim and furniture, including kitchens and bathrooms. This paint is specifically formulated to absorb and neutralize formaldehyde from surfaces and surrounding air, for improved indoor air quality. Available in four sheens.
Preparation	Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, or contaminants. Repair any cracks, holes, or imperfections. Sand glossy surfaces with fine grit sandpaper first to ensure good adhesion. Before painting, clean stubborn areas with mild detergent, and remove any loose, or peeling paint, then rinse and dry thoroughly before painting. ECOS Paint is self-priming on most properly prepared surfaces, but we recommend using one of our primers if painting over a higher gloss finish, a darker color, or applying an accent color, or applying over bare or heavily sanded surfaces.
Application and Clean Up	Stir well before use. If using multiple containers of the same color, intermix them all to ensure color uniformity. Can be applied using a high quality synthetic brush, rolled using a shed-resistant 3/8” to 1/2” roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Do not apply in temperatures below 50°F (10°C). For best results, always apply two coats of paint. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not thin the paint. Clean up with warm soapy water.

Ingredients

Ingredients
FUNCTION	INGREDIENT	DESCRIPTION
Vehicle	Water	H₂O
Absorbent	Zeolite	Used in water purification
Binder	Acrylic	Flexible elastic polymer
Defoamer	Mineral Oil	Used in moisturizers
Dispersant	Ammonium Polyacrylate	Stabilizer used in skin care
Extender	Kaolin Clay	Mineral used in porcelain
Extender Pigment	Titanium Dioxide	Naturally occuring mineral
pH Stabilizer	Ammonia	Used to treat water
Preservative	Glycerine	Used in first aid
Preservative	Sodium Salt	Used in shampoo
Preservative Adhesion	Vanilla	Derived from orchids
Surfactant	Acrylic	Wetting agent for coatings
Surfactant	Ethoxylated Acetylenic	Wetting agent for inks
Thickener	Limestone	Powdered marble
Thickener	Polysaccharide	Food additive