NON-TOXIC

Conforms to ASTM-D4236, specifically concerning oral toxicity, skin irritation and respiratory effects.

ZERO VOC

Conforms to CDPH 01350 (VOC emissions test taken at 11, 12, & 14 days for classroom and office use).

INGREDIENT TRANSPARENCY

We share ingredient lists for our products to help you make an informed buying decision.

EMR/EMF Shielding Paint

$135.75 $101.81 Quart | $489.95 $367.46 Gallon

EMR/EMF Shielding Paint uses a high-quality nickel flake to provide shielding to help reduce EMF & RF frequencies and EMR radiation, including Wi-Fi and 5G. Having a dark gray color, it is intended to be over-painted by ECOS wall paint. This EMR protection paint is recommended for use on primed walls, floors, and ceilings. An EMR/EMF Grounding Kit is required to achieve optimum performance. Available to purchase here.

Select Size

Quart

Gallon

Select Quantity

How much do I need?

Order an un-tinted sample of this product

Product Overview

EMR/EMF Shielding Paint uses a high-quality nickel flake to provide shielding to help reduce EMF & RF frequencies and EMR radiation, including cellular, WiFi and 5G.

Finish: Dark gray in color, it is intended to be over-painted by ECOS wall paint
Water-Based: VOC-free formula provides long-lasting protection without the harsh chemicals or odors found in conventional paints
Interior / Exterior: Interior
Recommended For: Primed walls & ceilings, floors and and wooden trim
You Need to Know: With one coat of protection, power attenuation of 30.6 dB (99.9%) is achieved, rising to 45dB (99.99%) with two coats. An EMR/EMF Grounding Kit is required to achieve optimum performance. Available to purchase here
Coverage: 550 sq. ft. per gallon | 137 sq. ft. per quart; 2 coats recommended.
Exceptional Value: Compared with carbon-based shielding paints, that only cover around 300 sq. ft. per gallon, ECOS covers up to 80% more wall area with outstanding performance.
Application: Apply with a foam or short pile gloss roller. See Application Instructions below for more details
Storage: This product should be stored in a dry place, out of direct sunlight and in a temperature between 60 and 80 degrees Fahrenheit

Application Instructions

Product Label
Coverage	550 sq. ft. per gallon
Recommended coats	2
Description	EMR/EMF Shielding Paint uses a high-quality nickel flake to provide shielding to help reduce EMF & RF frequencies and EMR radiation, including Wi-Fi and 5G. Having a dark gray color, it is intended to be over-painted by ECOS wall paint. This EMR protection paint is recommended for use on primed walls, floors, and ceilings. An EMR/EMF Grounding Kit is required to achieve optimum performance. Available to purchase here.
Preparation	Surfaces must be clean, dry and free of grease. Remove all loose and flaking material and, if previously wallpapered, remove all traces of paste and size. Prime bare plaster with ECOS Plaster Sealer, and bare sheetrock, with ECOS Drywall Primer. This product can be painted directly onto wallpaper but this is not recommended as the product is intended to be a permanent structural feature. WARNING: Older buildings may contain lead-based paint, which requires professional remediation if it is disturbed. If in doubt, consult with a professional from a Lead-Safe Certified Firm.
Application and Clean Up	READ ALL APPLICATION NOTES BEFORE COMMENCING. Do not thin. Stir gently and thoroughly before use. Apply in two medium coats with a 6 - 9" foam or short pile gloss roller, ensure the first coat is fully dry before recoating (minimum of 4hrs). Normally touch dry in 1-2 hours. Avoid temperatures below 41°F (5°C) and above 68°F (20°C). Once the ELF shielding wallpaint is dry it can be finished by over-coating with any of our wall paints and, once earthed, the shielding paint is activated against both high and low frequency radiations. If protection is needed against high frequencies only (microwaves, mobile telephone masts, etc.) then grounding is not necessary. However, for full shielding efficiency, it is essential that this product be earthed (grounded). This can easily be achieved as follows: 1. Turn OFF the power to all electrical circuits in the area. If in doubt about how to do this, consult a qualified electrician. 2. Loosen the screws of all the light switch and power socket panels. 3. When painting, extend the paint over the edge of the metal box behind the plate, as this should be grounded. 4. If boxes are plastic, a grounding wire should be extended to the edge of the box and this used as the grounding point for the paint. If in any doubt about how to use or apply this product, contact us for assistance

Ingredients

Ingredients
FUNCTION	INGREDIENT	DESCRIPTION
Vehicle	Water	H₂O
Binder	Acrylic	Flexible elastic polymer
Binder	Vinyl Acetate	Flexible elastic polymer
Elastomer	Silicone	Rubber material used in cookware
Extender	Bentonite	Clay mineral used in cosmetics
Metal	Nickel flake	Used in conductive coatings
pH Stabilizer	Ammonia	Used to treat water
pH Stabilizer	Lye	Used for making soap
Preservative	Hydrogen Peroxide	Antiseptic
Preservative	Sodium Salt	Used in shampoo
Rheology Modifier	Hydroxyethyl Cellulose	Used in vitamin capsules
Rheology Modifier	Water Based Acrylate	Used in cosmetics
Thickener	Acrylic	Used in filter systems
Thickener	Polysaccharide	Food additive

Data Sheets

FAQs

Reviews

NON-TOXIC

Conforms to ASTM-D4236, specifically concerning oral toxicity, skin irritation and respiratory effects.

ZERO VOC

Conforms to CDPH 01350 (VOC emissions test taken at 11, 12, & 14 days for classroom and office use).

INGREDIENT TRANSPARENCY

We share ingredient lists for our products to help you make an informed buying decision.

COLOR	LIGHT/DARK	RED	BROWN	YELLOW	WHITE	BLACK
Driftwood	1	1	0	1	0	2
Weathered	1	0	0	1	1	2
Natural	1	1	0	1	0	0
Barnwood	2	1	2	2	0	0
Saddle	2	0	2	1	2	1
Pickling White	3	0	0	0	9	0
Antler	3	1	3	0	2	0
Wine Barrel	3	0	2	0	2	2
Pine Needles	3	0	0	7	0	1
Spiced Pecan	3	3	0	3	0	0
Sable	3	1	2	0	2	2
Golden Oak	4	4	5	3	0	0
Classic Gray	5	0	0	0	5	5
Special Walnut	5	0	6	0	0	1
Early Americana	5	0	6	1	0	0
Fallen Leaves	6	1	6	4	0	1
Cherry Red Oak	7	7	1	0	0	0
Deep Red Mahogany	7	8	0	0	0	0
British Chestnut	7	7	3	0	0	0
Deep Smoke	7	0	0	0	2	6
Dark Walnut	9	0	7	1	0	6
Black Onyx	10	0	1	0	0	9
Lightest = 1, Darkest = 10		1 = Least, 10 = Most

EMR/EMF Shielding Paint

$0.00

You may also be interested in...

Eggshell Paint

Wall Primer

All-in-One Painter's Kit

EMR/EMF Grounding Kit

🇬🇧 Shop in the UK