Filler Powder

$36.95 Quart | $67.25 Gallon

Filler Powder is the ideal filler for small or large cracks, holes, joints and a variety of similar jobs. The white powder mixes easily to a smooth consistency, which dries to an easy to sand finish. Special binders give excellent adhesion. This product must be used in conjunction with Filler Sealer.

Select Size

Quart

Gallon

Select Quantity

Order an un-tinted sample of this product

Product Overview

Filler Powder is the ideal filler with special binders for excellent adhesion

Finish: Smooth, easy to sand finish
Water-Based: Non-toxic, VOC-free formula provides long-lasting protection without the harsh chemicals or odors found in conventional paints
Interior / Exterior: Interior & Exterior
Recommended For: Filling small or large cracks, holes, and joints.
You Need to Know: This product must be used in conjunction with Filler Sealer
Coverage: 400 sq. ft. per gallon | 100 sq. ft. per quart; 1 coat recommended
Application: Apply with a filling knife/trowel after mixing with water. See Application Instructions below for more details

Application Instructions

Product Label
Coverage	400 sq. ft. per gallon
Recommended coats	1
Description	Filler Powder is the ideal filler for small or large cracks, holes, joints and a variety of similar jobs. The white powder mixes easily to a smooth consistency, which dries to an easy to sand finish. Special binders give excellent adhesion. This product must be used in conjunction with Filler Sealer.
Preparation	Ensure crack or hole is dry and free from loose or dusty material. Touch up any nails and screw heads with two-coats of ECOS Stainblock, to avoid ruststaining. WARNING: Older buildings may contain lead-based paint, which requires professional remediation if it is disturbed. If in doubt, consult with a professional from a Lead-Safe Certified Firm.
Application and Clean Up	Mix 2 parts Filler with 1 part water (approx) to a smooth paste. The filler is ready for use in about one minute and remains workable for more than 20 minutes. Press filler paste into hole with a filling knife/trowel. Fill the hole slightly proud, or slightly higher than the surface, for sanding purposes. Sand, when fully dry, to a smooth flat surface and brush/wipe free of dust. Special easysand formula! Normally sets fully in around 1 to 2 hours. Before painting, seal with one coat of ECOS Filler-Sealer and allow to dry fully. Clean bowl and tools with warm water. Do not wash excess material into drains, but allow to dry on paper, then dispose of as household trash.

Ingredients

Ingredients
FUNCTION	INGREDIENT	DESCRIPTION
Extender	Kaolin Clay	Mineral used in porcelain
Extender Pigment	Talc	Clay mineral
Thickener	Limestone	Powdered marble
Thickener	Silicon Dioxide	Quartz