Matte Paint

$37.95 Quart | $78.35 Gallon | $364.95 5-Gallon

Matte Paint is a low sheen, protective finish that dries to a hard, durable film. Ideal for interior walls and ceilings in living rooms, dining rooms, and bedrooms. Its low light reflectance lets it mask some flaws or imperfections on many substrates. Not suitable for high moisture environments such as kitchens or bathrooms, where ECOS Eggshell Paint is preferred.

Select Paint Color

The colors on your screen do not always give an accurate representation. Ordering a sample or free color card is highly recommended.

I've ordered this color before

Yes

Select Size

Quart

Gallon

5-Gallon

Select Quantity

Order an un-tinted (white) sample of this product

Product Overview

Matte Paint is a protective finish that dries to a hard, durable film.

Finish: Low sheen
Water-Based: Non-toxic, VOC-free formula provides long-lasting protection without the harsh chemicals or odors found in conventional paints
Interior / Exterior: Interior
Recommended For: Walls & ceilings in living rooms, dining rooms, and bedrooms. Its low light reflectance lets it mask some flaws or imperfections on many surfaces
Not Suitable For: High moisture environments such as kitchens or bathrooms, where ECOS Eggshell Paint is preferred
Exceptional Coverage: Better coverage than conventional paints - up to 1.5x more! 560 sq. ft. per gallon | 140 sq. ft. per quart; 2 coats recommended
Application: Apply with a synthetic brush, roller, or airless sprayer. See Application Instructions below for more details

Application Instructions

Product Label
Coverage	560 sq. ft. per gallon
Recommended coats	2
Description	Matte Paint is a low sheen, protective finish that dries to a hard, durable film. Ideal for interior walls and ceilings in living rooms, dining rooms, and bedrooms. Its low light reflectance lets it mask some flaws or imperfections on many substrates. Not suitable for high moisture environments such as kitchens or bathrooms, where ECOS Eggshell Paint is preferred.
Preparation	Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, or contaminants. Repair any cracks, holes, or imperfections. Sand glossy surfaces with fine grit sandpaper first to ensure good adhesion. Before painting, clean stubborn areas with mild detergent, and remove any loose, or peeling paint, then rinse and dry thoroughly before painting. We recommend using one of our primers if painting over a higher gloss finish, a darker color, or applying an accent color, or applying over bare or heavily sanded surfaces.
Application and Clean Up	Stir well before use. If using multiple containers of the same color, intermix them all to ensure color uniformity. Can be applied using a high quality synthetic brush, rolled using a shed-resistant 3/8” to 1/2” roller cover, or sprayed using an airless sprayer with 0.015” to 0.017” tip at 1600 to 1800 psi. Do not apply in temperatures below 50°F (10°C). For best results, always apply two coats of paint. Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Do not thin the paint. Clean up with warm soapy water.

Ingredients

Ingredients
FUNCTION	INGREDIENT	DESCRIPTION
Vehicle	Water	H₂O
Binder	Acrylic	Flexible elastic polymer
Binder	Vinyl Acetate	Flexible elastic polymer
Defoamer	Mineral Oil	Used in moisturizers
Dispersant	Ammonium Polyacrylate	Stabilizer used in skin care
Elastomer	Silicone	Rubber material used in cookware
Extender	Kaolin Clay	Flexible elastic polymer
Extender Pigment	Titanium Dioxide	Naturally occuring mineral
pH Stabilizer	Ammonia	Used to treat water
pH Stabilizer	Lye	Used for making soap
Preservative	Hydrogen Peroxide	Antiseptic
Preservative	Sodium Salt	Used in shampoo
Thickener	Limestone	Powdered marble
Thickener	Silicon Dioxide	Quartz