NON-TOXIC

Conforms to ASTM-D4236, specifically concerning oral toxicity, skin irritation and respiratory effects.

ZERO VOC

Conforms to CDPH 01350 (VOC emissions test taken at 11, 12, & 14 days for classroom and office use).

INGREDIENT TRANSPARENCY

We share ingredient lists for our products to help you make an informed buying decision.

Interior Gloss Clear Varnish

$48.95 Quart | $109.45 Gallon

Interior Gloss Clear Varnish is a high sheen, protective finish that dries to a hard, washable, durable film. Ideal for wood floors, window frames, doors, trim, furniture, cabinets and other woodwork. Not suitable for oily woods such as teak, cedar, redwood, and olive. Not recommended for countertop applications.

Select Size

Quart

Gallon

Select Quantity

How much do I need?

Order an un-tinted sample of this product

Product Overview

Interior Gloss Clear Varnish is a protective finish that dries to a hard, washable, durable film.

Finish: Clear, high sheen - our most glossy varnish!
Water-Based: Non-toxic, VOC-free formula provides long-lasting protection without the harsh chemicals or odors found in conventional paints
Interior / Exterior: Interior
Recommended For: Wood floors, window frames, doors, trim, furniture, cabinets and other woodwork
Not Suitable For: Oily woods such as teak, cedar, redwood, and olive or countertop applications.
Coverage: 500 sq. ft. per gallon | 125 sq. ft. per quart; 3 coats recommended
Application: Apply with a synthetic brush, foam brush, or lambswool applicator (for floors). See Application Instructions below for more details

Application Instructions

Product Label
Coverage	500 sq. ft. per gallon
Recommended coats	3
Description	Interior Gloss Clear Varnish is a high sheen, protective finish that dries to a hard, washable, durable film. Ideal for wood floors, window frames, doors, trim, furniture, cabinets and other woodwork. Not suitable for oily woods such as teak, cedar, redwood, and olive. Not recommended for countertop applications.
Preparation	Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, flaking pieces, or contaminants. Repair any cracks, holes, or imperfections. Sand the wood in the direction of the grain to obtain a smooth uniform surface. First use a medium-grade sandpaper (120 grit) working your way to fine-grade sandpaper (220 grit). Do not use steel wool. Wipe clean with a damp cloth to remove all sanding dust, and let dry thoroughly before applying the varnish. Always spot test on an inconspicuous area to ensure satisfactory results.
Application and Clean Up	Stir thoroughly before and during use to eliminate any settling. Do not shake. Do not thin. Do not apply in temperatures below 50°F (10°C). Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Clean application tools with warm soapy water. For application on window frames, doors, trim and furniture: apply a thin coat of varnish using a high quality synthetic bristle brush, or foam brush. Do not allow the varnish to puddle, or over-brush the finish. Once dry, lightly sand the entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion. Remove all dust. Apply a second coat. Allow 24 hours before light use. For application on wooden floors, use a lambswool or synthetic pad applicator, and maintain a wet edge to avoid lap marks. Apply three coats, sanding between coats. Avoid heavy traffic and replacing of furniture for 72 hours after the final coat. When replacing furniture, do not slide, and use felt protectors under table and chair legs to avoid scratching. Do not install rugs, or clean floors for seven days.
Maintenance	To clean surfaces we recommend using warm water and a mild detergent. Do not use abrasive or harsh chemicals such as ammonia, vinegar, powdered all-purpose cleaners, Endust, Pledge, Murphy’s Oil Soap, any type of wax, or silicone based products. Do not steam clean. Do not allow water to stand on the floor for extended periods of time.

Ingredients

Ingredients
FUNCTION	INGREDIENT	DESCRIPTION
Vehicle	Water	H₂O
Binder	Acrylic	Flexible elastic polymer
Binder	Ethylene oxide urethane	Used to sterilize medical equipment
Defoamer	Mineral Oil	Used in moisturizers
Preservative	Sodium Salt	Used in shampoo
Surfactant	Ethoxylated Acetylenic	Wetting agent for inks

Data Sheets

FAQs

Reviews

NON-TOXIC

Conforms to ASTM-D4236, specifically concerning oral toxicity, skin irritation and respiratory effects.

ZERO VOC

Conforms to CDPH 01350 (VOC emissions test taken at 11, 12, & 14 days for classroom and office use).

INGREDIENT TRANSPARENCY

We share ingredient lists for our products to help you make an informed buying decision.

COLOR	LIGHT/DARK	RED	BROWN	YELLOW	WHITE	BLACK
Driftwood	1	1	0	1	0	2
Weathered	1	0	0	1	1	2
Natural	1	1	0	1	0	0
Barnwood	2	1	2	2	0	0
Saddle	2	0	2	1	2	1
Pickling White	3	0	0	0	9	0
Antler	3	1	3	0	2	0
Wine Barrel	3	0	2	0	2	2
Pine Needles	3	0	0	7	0	1
Spiced Pecan	3	3	0	3	0	0
Sable	3	1	2	0	2	2
Golden Oak	4	4	5	3	0	0
Classic Gray	5	0	0	0	5	5
Special Walnut	5	0	6	0	0	1
Early Americana	5	0	6	1	0	0
Fallen Leaves	6	1	6	4	0	1
Cherry Red Oak	7	7	1	0	0	0
Deep Red Mahogany	7	8	0	0	0	0
British Chestnut	7	7	3	0	0	0
Deep Smoke	7	0	0	0	2	6
Dark Walnut	9	0	7	1	0	6
Black Onyx	10	0	1	0	0	9
Lightest = 1, Darkest = 10		1 = Least, 10 = Most

🇬🇧 Shop in the UK

Interior Gloss Clear Varnish

$0.00

You may also be interested in...

Wood Stain

Interior Satin Clear Varnish

Interior Semi-Gloss Clear Varnish

Wood Conditioner