NON-TOXIC

Conforms to ASTM-D4236, specifically concerning oral toxicity, skin irritation and respiratory effects.

ZERO VOC

Conforms to CDPH 01350 (VOC emissions test taken at 11, 12, & 14 days for classroom and office use).

INGREDIENT TRANSPARENCY

We share ingredient lists for our products to help you make an informed buying decision.

Filler Sealer

$48.95 Quart | $109.45 Gallon

Filler Sealer is a clear, colorless liquid used on top of ECOS Filler Powder to seal the surface before applying a painted finish.

Select Size

Quart

Gallon

Select Quantity

How much do I need?

Order an un-tinted sample of this product

Filler Sealer is used on top of ECOS Filler Powder to seal the surface.

Finish: Clear, colorless finish ready for painted topcoat
Water-Based: Non-toxic, VOC-free formula provides long-lasting protection without the harsh chemicals or odors found in conventional paints
Interior / Exterior: Interior & Exterior
Recommended For: Applying over ECOS Filler Powder to seal the surface before adding a painted finish
Not Suitable For: Large areas or to be used as filler for an entire room
Coverage: 80 sq. ft. per gallon | 20 sq. ft. per quart; 1 coat recommended
Application: Apply with a synthetic brush, or foam brush. See Application Instructions below for more details
Storage: This product should be stored in a dry place, out of direct sunlight and in a temperature between 60 and 80 degrees Fahrenheit

Product Label
Coverage	80 sq. ft. per gallon
Recommended coats	1
Description	Filler Sealer is a clear, colorless liquid used on top of ECOS Filler Powder to seal the surface before applying a painted finish.
Preparation	Abrade the dry filler to a flat surface and brush/wipe free of dust. WARNING: Older buildings may contain lead-based paint, which requires professional remediation if it is disturbed. If in doubt, consult with a professional from a Lead-Safe Certified Firm.
Application and Clean Up	Apply thinly over all areas of fillers before priming or otherwise painting, and allow to dry thoroughly before over-coating – a minimum of 3 hours.

Ingredients
FUNCTION	INGREDIENT	DESCRIPTION
Vehicle	Water	H₂O
Binder	Acrylic	Flexible elastic polymer
Binder	Ethylene oxide urethane	Used to sterilize medical equipment
Defoamer	Mineral Oil	Used in moisturizers
Preservative	Sodium Salt	Used in shampoo
Rheology Modifier	Modified Paraffin	Wax product
Surfactant	Ethoxylated Acetylenic	Wetting agent for inks