We use cookies to ensure you get the best experience on our website. Learn More

x

NEW! BUY MORE, SAVE MORE: 10% OFF $500+ | 12% OFF $1,000+ | 15% OFF $2,000+

Loading...

Interior Satin Clear Varnish

$49.95 Quart | $109.45 Gallon
Interior Satin Clear Varnish is a low to medium sheen, protective finish that dries to a hard, washable, durable film. Ideal for wood floors, window frames, doors, trim, and furniture. Not suitable for oily woods such as teak, cedar, redwood, and olive. Not recommended for countertop applications.

How much do I need?
Order an un-tinted sample of this product
  • Product Overview and Uses

    • Interior Satin Clear Varnish is a clear, protective finish that dries to a hard, washable, durable film.

    • Finish: Clear low to medium sheen
    • Water-Based: Non-toxic, VOC-free formula provides long-lasting protection without the harsh chemicals or odors found in conventional paints
    • Interior / Exterior: Interior
    • Recommended For: Wood floors, window frames, doors, trim, furniture, cabinets and other woodwork
    • Not Suitable For: Oily woods such as teak, cedar, redwood, and olive or countertop applications.
    • Coverage: 500 sq. ft. per gallon | 125 sq. ft. per quart; 3 coats recommended
    • Application: Apply with a synthetic brush, foam brush, or lambswool applicator (for floors). See Application Instructions below for more details
    • Storage: This product should be stored in a dry place, out of direct sunlight and in a temperature between 60 and 80 degrees Fahrenheit
  • Application Instructions
    • Product Label
    Coverage 500 sq. ft. per gallon
    Recommended coats 3
    Description Interior Satin Clear Varnish is a low to medium sheen, protective finish that dries to a hard, washable, durable film. Ideal for wood floors, window frames, doors, trim, and furniture. Not suitable for oily woods such as teak, cedar, redwood, and olive. Not recommended for countertop applications.
    Preparation Good surface preparation is vital for the perfect finish. Surfaces should be clean, dry, and free from any dirt, dust, flaking pieces, or contaminants. Repair any cracks, holes, or imperfections. Sand the wood in the direction of the grain to obtain a smooth uniform surface. First use a medium-grade sandpaper (120 grit) working your way to fine-grade sandpaper (220 grit). Do not use steel wool. Wipe clean with a damp cloth to remove all sanding dust, and let dry thoroughly before applying the varnish. Always spot test on an inconspicuous area to ensure satisfactory results.
    Application and Clean Up Stir thoroughly before and during use to eliminate any settling. Do not shake. Do not thin. Do not apply in temperatures below 50°F (10°C). Dries to the touch in 30 to 60 minutes. Recommended wait time between coats is 2 to 4 hours. High humidity and cool temperatures may result in longer dry and recoat times. Clean application tools with warm soapy water. For application on window frames, doors, trim and furniture: apply a thin coat of varnish using a high quality synthetic bristle brush, or foam brush. Do not allow the varnish to puddle, or over-brush the finish. Once dry, lightly sand the entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion. Remove all dust. Apply a second coat. Allow 24 hours before light use. For application on wooden floors, use a lambswool or synthetic pad applicator, and maintain a wet edge to avoid lap marks. Apply three coats, sanding between coats. Avoid heavy traffic and replacing of furniture for 72 hours after the final coat. When replacing furniture, do not slide, and use felt protectors under table and chair legs to avoid scratching. Do not install rugs, or clean floors for seven days. Clear coat finishes, including varnish, cure over an extended period of time – about thirty days. During this time, extra care should be taken not to damage the surface of the finish.
    Maintenance To clean surfaces we recommend using warm water and a mild detergent. Do not use abrasive or harsh chemicals such as ammonia, vinegar, powdered all-purpose cleaners, Endust, Pledge, Murphy’s Oil Soap, any type of wax, or silicone based products. Do not steam clean. Do not allow water to stand on the floor for extended periods of time.
  • Ingredients
    • Ingredients
    FUNCTION INGREDIENT DESCRIPTION
    Vehicle Water H2O
    Binder Acrylic Flexible elastic polymer
    Ethylene oxide urethane Used to sterilize medical equipment
    Defoamer Mineral Oil Used in moisturizers
    Preservative Sodium Salt Used in shampoo
    Rheology Modifier Modified Paraffin Wax product
    Surfactant Ethoxylated Acetylenic Wetting agent for inks
  • Data Sheets
  • FAQs

NON-TOXIC
Conforms to ASTM-D4236, specifically concerning oral toxicity, skin irritation and respiratory effects.

ZERO VOC
Conforms to CDPH 01350 (VOC emissions test taken at 11, 12, & 14 days for classroom and office use).

INGREDIENT TRANSPARENCY
We share ingredient lists for our products to help you make an informed buying decision.

You may also be interested in...

Wood Stain

Wood Stain

Wood Stain is a tinted stain that penetrates wood changing its color, and enriching the natural grai..

Interior Gloss Clear Varnish

Interior Gloss Clear Varnish

Interior Gloss Clear Varnish is a protective finish that dries to a hard, washable, durable film...

Interior Semi-Gloss Clear Varnish

Interior Semi-Gloss Clear Varnish

Interior Semi-Gloss Clear Varnish is a clear, protective finish that dries to a hard, washable, dura..

Wood Conditioner

Wood Conditioner

Wood Conditioner is a pre-stain that helps with the uniform penetration of ECOS Wood Stain, particul..